home

V35 - Victory Board™

Operation Instructions

Operation Instructions

The Victory Board™ is a direct plug and play replacement for all existing HALO B™ boards.

Turning on: To activate HALO™ Victory Board™ press and release the button in a regular fashion. HALO™ will now indicate what mode the board is in. The LED indication will blink GREEN the corresponding number of times for the code indication and then blink RED once.

For example: Once HALO™ is activated, if you are in code 4 you will get 4 GREEN blinks and one RED blink and HALO™ will then activate. Once a code is selected HALO™ will automatically use the selected code until the batteries are removed.

NOTE - Upon placing a new set of batteries in HALO™ the code default will be code 3 as will be indicated.

Turning off: To deactivate HALO™ Victory Board™ press and hold the button until HALO™ gives a RED indication. Release the button and HALO™ will power down to the OFF state.

VICTORY™ Codes -

  1. 17 BPS
  2. 21 BPS
  3. 24 BPS
  4. 28 BPS
  5. 32 BPS
  6. 35 BPS

Programming: To enter programming mode with the HALO™ Victory Board™ press and hold the button when HALO™ is in an OFF state until the LED begins to flash. Release the button.. HALO™ will begin to sequence the current mode selected. For example 3 GREEN flashes means you are at speed 3 - 24bps. Now in programming mode, each time the button is pressed the program advances 1 increment. Press the button once per each advancement. When you have advanced to the setting you would like, do not press the button any further. This indication will repeat itself for 10 seconds then HALO™ will then turn itself off. Programming is complete.

NOTE - After 10 seconds of no activity HALO™ Victory Board™ will return to the off state.

EXAMPLE - If you are in program 2 and you press the button 2 times, you will now be in program 4. If the button is pressed when program 6 is selected, Victory™ will then move to program 1. The 10 second timer will reset after each button press. The LED indication will blink the appropriate number of times as indicated before and repeat the sequence until 10 seconds has elapsed.

Need Parts or Technical Help?

Contact Paintball Solutions